![huawei hg532e repeater huawei hg532e repeater](https://content.instructables.com/ORIG/F02/WYRJ/IG9ML6GM/F02WYRJIG9ML6GM.jpg)
I configure my WAP2000 and the signal seems to be excellent. Under the virtual interfaces section, you can choose a different SSID so that you can connect to that router specifically if you're closest to it. I have a wap2000 access point I want to use it as a repeater to a router Wifi Huawei HG532e. In the physical interface section, enter the SSID of your primary router and choose "Bridged" for network connections this means that your repeater router will get the signal from and be connected to your current network.
![huawei hg532e repeater huawei hg532e repeater](https://m.media-amazon.com/images/I/51CyyXF5t2L._AC_SX569_.jpg)
If you want to use your old router to increase the range of your wireless network, choose "Repeater" for the Wireless Mode.For Network Mode, SSID, and Wireless Channel, set the same options as your primary router. If you want to connect wired devices (e.g., your TV or game console) on the old router and have it connected wirelessly to your modem or other router, then choose "Client Bridge" in the Wireless Mode drop-down.Here's where the instructions differ, depending on what you want to do: Open a web browser and go to 192.168.1.1 to get to the DD-WRT control panel (If your computer doen't use DHCP to get its IP address automatically, you'll have to set the IP address to the same subnet-e.g., 192.168.1.5).
#Huawei hg532e repeater install#
Install DD-WRTÄo a hard reset on your router (check the manual or search for " hardware reset," then connect your computer to the router's LAN port with an Ethernet cable. If your router can't install DD-WRT, you can always buy a used one, such as the popular Linksys WRT54G for pretty cheap. I already tried to decompile de cli MIPS program from my modem but i don't understand well how does.
#Huawei hg532e repeater password#
Head to DD-WRT to find out if your router model is supported and download the latest release. Hello, I have modem HG532e and i want to access to the underlying linux system using telnet and my user and password that i already have, but when i am in the ATP> prompt and type sh or shell it gives me 'Command failed'. There are a few different scenarios here, but for all of them, you'll need to install the Linux-based DD-WRT to replace the old router's default firmware-and give it not only more options but also enhance its performance.
![huawei hg532e repeater huawei hg532e repeater](https://i.ytimg.com/vi/62BzefXJr00/maxresdefault.jpg)
This means that even devices that can't reach your main router can get connected through the old router anywhere you put it. By installing the free DD-WRT firmware on the old router, you can turn it into a wireless bridge or repeater. If you own devices with wired-only (Ethernet) connections and your router or modem is too far away or your wireless network doesn't cover enough area in your home, an old router can solve your problems.